skip to Main Content
Menu
Custom LED lighting products chosen by the world's top retail & architecture design houses. USA & Canada made.
Custom LED lighting products chosen by the world's top retail & architecture design houses. USA & Canada made.
Custom LED lighting products chosen by the world's top retail & architecture design houses. USA & Canada made.

Plug-in Power Adapter,
12 V / 60 W

Save

Save

Save

Black Plug-In Power Adapter 12V 60W
Black Plug-In Power Adapter 12V 60W

Plug-in Power Adapter, 12 V / 60 W

About

A slim, easy to mount, plug and play power adapter designed for compatibility with DLC lighting products. Proven in field for excellent reliability. This DLC standard voltage power adapter is UL Class 2 certified. May be used virtually worldwide with a change to the AC power cord. This top seller is kept in high inventory at all times.

Save

Save

Save

     

Save

Save

Save

FEATURES
Universal AC input (100 ~ 240 V)
Over voltage protection
Short circuit protection
High reliability
Over 88% efficiency
Class 2 LED Driver
Technical Information
Input
Rated Voltage Range 1100 ~ 240 VAC
Operating Input Voltage Range 190 ~ 264 VAC
Rated Input Frequency 150 / 60 Hz
Operating Input Frequency 147 ~ 63 Hz
Power 160 W
AC Current 1< 1.5 A (rms) / 100 VAC; < 0.8 A (rms) / 240 VAC
Inrush Current 1< 30 A (peak)
Leakage Current 2< 250 uA
Power Cable 3 Pole SJT 16/3 16 AWG 3C
Wiring3 Pole AC Inlet IEC 320-c14. 10 A / 250 V, 65°C, Class l. Refer to drawing.
Output
Rated Output Voltage 312 VDC
Output Voltage Range (CV mode) 311.4 ~ 12.6 VDC
Rated Output Current Range30 ~ 5 A
Rated Current 35 A (± 1.5%)
Limited Output Current 34.8 A ~ 5.2A
Maximum Ripple and Noise 4< 200 mVp-p
Start Up Delay< 3000 ms / 100 VAC, 25 °C; < 1500 ms / 240 VAC, 25 °C
Hold Up Time16 ms / 100 / 240 VAC, full load
Wire Size 16 AWG
WiringIEC 320 c13 / 14 10 A / 250 V, 65°C, Class l. Refer to drawing.
Protections
Over Voltage Protection< 30 VDC HICCUP
Short Circuit ProtectionOutput Short HICCUP
Environment
Operating Temperature0 °C ~ +40 °C
Storage Temperature-15 °C ~ +80 °C
Operating Humidity20% ± 80% RH (non-condensing)
Storage Humidity5% ± 95% RH (non-condensing)
Class 2 CompliantYes
Additional
Withstanding Voltage 53.0 kV Primary-secondary (reinforce);
1.5 kV - F.G. (basic)
Isolation Resistance> 100 M Ohm - Primary - F.G. at 500 VDC
No Load Power Consumption< 0.21 W
Max Load Power Consumption< 72 W
Efficiency 6> 88%
CertificationsUL, cUL Listed, Class 2
UL Energy Verified
FCC
PCB
MaterialCEM-1
Grade 7V-0
Thickness 81/16" (1.6 mm)
Enclosure
Material 9PC
GradeV-0
Enclosure Dimensions 79 1/16” (230 mm) L x 1 1/2” (38 mm) W x 1 3/16” (30.5 mm) H

Front View

Plug-in Power Adapter 12 V / 60 W front view

Profile View

Plug-in Power Adapter 12 V / 60 W profile view



Electrical Components

Plug-in Power Adapter 12 V / 60 W electrical components




Notes:

  1. At rated input voltage
  2. Between primary and secondary
  3. At operating input voltage and temperature
  4. At 20 MHz bandwitdh by oscilloscope
  5. Cut-off current: 10 mA Time: 1 minute
  6. Voltage / Frequency: 115 VAC / 50 Hz, 115 VAC / 60 Hz, 230 VAC / 50 Hz, 230 VAC / 60 Hz. Current: 25% / 50 % / 75% / 100% of rated output current. Efficiency should be taken by average of each condition after 30 min aging
  7. UL approved
  8. Single side allowed
  9. Non- flammable

Trouble Shooting Tips: Flickering of the connected LED lights indicates an overload. Lower the LED load by adding more power adapters. Maintain proper ventilation for each power adapter

The recommended maximum wattage should not exceed 80% of the adapter’s rated output.

EMI Standard: This product shall comply with required EMI / RFI standards when tested in a (customer) system configuration

Order Information

Please contact us for order information.

Downloads
COMPATIBLE PRODUCTS