
LumiFabric
Slim, Frameless Fabric Light Box
Lit with LumiSheet
Our LumiFabric light box collection now includes the thinnest fabric frame yet. Now in the lowest profile offered, you see brilliant images with no shine or sheen in a 5/8″ frameless profile. This option offers an even and consistent light output with a the lowest profile frame and the most lightweight backlit signage available. The LumiFabric UltraSlim frame is nearly invisible.
Virtually Frameless
At under an inch in depth, LumiFabric is the thinnest fabric light box in the industry.
Vibrant
Printed fabric stretches across our LED light panels for a vibrant, frameless look.
Even Illumination
Lit with LumiLite for even and consistent illumination, long lifespan, and superior light quality.
Mounting Options
Easily wall mounted or suspended from the ceiling.
Efficient
70% less power consumption than fluorescent light boxes.
Custom
LumiFabric can be custom cut in any size up to 4? x 8? (1.2 m x 2.4 m).
Custom colors available
Custom colors available
LumiFabric Ultra Slim | |
---|---|
Electrical | |
Input Voltage | 24 VDC |
Power Consumption | 5.2 W/ft (standard) |
Wire Size | 20AWG 2 Wire |
Wiring | Each light box must have direct connection to power supply. Don not wire light boxes in a series. |
Connector | 2.1 / 5.5mm barrel plug. Standard 5' (1500mm), optional 10' (3000mm) |
Certification | UL recognized (E362079) UL Listed (E334549) |
Physical | |
Color Temperature | 2700 K 5000 K 6500K |
CRI | N/A |
Mounting | Wall mounted with screws or Z clips, optional cable hanging set x2 pcs (sold seperately) |
Operating Temperature | -30 ˚C(-22 ˚F) - +40 ˚C(+104 ˚F) |
Environment | Dry Location Only |
Minimum Size | 6" (76mm) L x 6" (76mm) W x 5/8" D |
Maximum Size | 96” (2438 mm) L x 48" (1219 mm) W x 5/8" (16 mm) D |
Weight | Approx. 0.55 lbs / sq ft |
Frame Material | Anodized Frame - Silver/Black |
Fabric Silicone Beading (Gasket) Size* | Recommended .11"(2.8 mm) thick x 0.43" (11mm) deep |
Notes: * Calculating Finished Print Size With Silicone Beading: LumiFabric width (O.D +1.00?) x light box height (O.D) +1.00?) Note: Calculation is for reference only. Different fabric materials have varying stretch which may require a +/- adjustment. DLC strongly recommends that customers mock up their graphics and sizing with their printer of choice
- ADA compliant
- Acrylic and other manufacturing components and methods may contribute to an expansion or contraction of sizes based on environmental or tooling factors. Please allow a minimum of ± 1/8? (3.175 mm) to compensate for any changes in the outside dimensions of this product
- LED Kelvin temperatures listed in this literature have been derived from raw LED data. Actual Kelvin ratings can vary +/- 200 K based upon environmental conditions including but not limited to inclusion into LGPs and the use of diffusion materials. A precise ANSI bin control system is utilized to help maintain LED conformity and to minimize variances
- DLC strives to maintain tight control over specification factors. However, specifications are subject to change on rare occasion. These changes may not be reflected here
Series Number | Frame Color | Size Length x Width (inch / mm) | Color Temperature | Illuminated Face Option | Cable Length | LED Location |
---|---|---|---|---|---|---|
LLB12-18 12 V LLB24-18 24 V LLB24-19-2mm | S: Silver B: Black CC: Custom color | OD: Frame outside dimension GS: Graphic size VA: Visual area | 2700 K (2 mm only) 3000 K 3500 K 4100 K 5000 K (2 mm only) 5300 K 6300 K CCT (on request) | SFI: Single face | WL15: 5' (1500 mm) power cord with 2.1 / 5.5 mm barrel plug WL30: 10' (3000 mm) power cord with 2.1 / 5.5 mm barrel plug | L1: LEDs 1 long edge L2: LEDs 2 long edges S1: LEDs 1 short edge S2: LEDs 2 short edges S4: LEDs along all edges |
Notes: * Calculating Finished Print Size With Silicone Beading: LumiFabric width (O.D +1.00?) x light box height (O.D) +1.00?) Note: Calculation is for reference only. Different fabric materials have varying stretch which may require a +/- adjustment. DLC strongly recommends that customers mock up their graphics and sizing with their printer of choice
- ADA compliant
- Acrylic and other manufacturing components and methods may contribute to an expansion or contraction of sizes based on environmental or tooling factors. Please allow a minimum of ± 1/8? (3.175 mm) to compensate for any changes in the outside dimensions of this product
- LED Kelvin temperatures listed in this literature have been derived from raw LED data. Actual Kelvin ratings can vary +/- 200 K based upon environmental conditions including but not limited to inclusion into LGPs and the use of diffusion materials. A precise ANSI bin control system is utilized to help maintain LED conformity and to minimize variances
- DLC strives to maintain tight control over specification factors. However, specifications are subject to change on rare occasion. These changes may not be reflected here